Reset TP Link Deco | Reset Deco | Factory Reset TP Link Deco

To factory reset TP Link Deco keep the unit powered on. Locate the Reset button on the device. Press and hold it according to your model instructions until the LED changes. Release the button and wait for the Deco to restart. The reset removes existing settings so you must configure your Deco network again.

Have you forgotten the password or lost access to your TP-link Deco Router? If you’ve forgotten your password or lost access, follow these steps to reset your TP-Link Deco router. The instructions provided below will help you to resolve the issue and work smoothly and hence regain access to your TP Link Deco Router. The use of the factory reset tp link deco steps shouldn’t be your sole priority in case of any issues. One can REBOOT or RESTART the system as well. Still, in the worst-case scenario, we can consider the following options to factory reset TP-Link Deco.

What Does a Factory Reset Do to TP-Link Deco?

When you reset Deco router, it can help resolve the following issues:

- Problems during streaming HD videos and playing video games.

- Problem while connecting to the internet.

- TP Link Deco keeps going offline

- Issues with broadband data speed.

- Problem with the wireless devices.

- The problem with routing.

- Problem with device incompatibilities.

Keep in mind the following instructions when you do TP-Link Deco reset:

- Take note that the router is switched on before it restarts.

- You can note the default IP address and domain name from the lowermost of the product.

When Should You Factory Reset TP Link Deco?

A factory reset should generally be considered after basic troubleshooting does not resolve the problem. Common situations include:

Deco cannot connect to the internet
You want to remove an old network configuration
You are preparing the Deco for another user
The existing configuration is causing persistent problems
You need to start the Deco setup again

Try restarting the Deco and checking your cables and internet connection before performing a factory reset.

How to Reset TP Link Deco Router– The Process?

Your TP Link Deco Router can be reset in two distinct ways- the Soft RESET method and the push-button RESET method. When you factory reset tp link deco router using any of these methods, the network settings including any device configuration that you have modified will be removed and deleted from the device memory. Also, the network SSIDs and the security protocol-like preferences will also be reset to default factory settings. Follow these general steps:

Keep your Deco unit powered on.
Locate the Reset button on the Deco unit.
Use a suitable tool if the Reset button is inside a small opening.
Press and hold the Reset button according to your Deco model instructions.
Wait for the LED status to change.
Release the Reset button.
Allow the Deco unit to restart completely.
Open the Deco app and configure the network again.

The exact reset procedure and LED behavior can vary between Deco models. Check the instructions for your specific model before starting the process.

TP Link Deco Hard Reset and Soft Reset

TP Link Deco can sometimes experience connection problems setup errors or network issues. Resetting the Deco system can help restore normal operation. There are two common approaches: a soft reset and a hard reset. Understanding the difference can help you choose the appropriate method.

TP Link Deco Hard Reset

- One way to reset TP Link Deco to factory settings is by using the Reset button.

- Locate the button on the rear or bottom of the device. You will find it concealed inside a small hole. This is done so the device doesn’t get reset accidentally.

- Press and hold the RESET button for about 10 seconds or until the LEDs on the front don’t glow simultaneously.

- Once that happens, release the RESET button and wait for the router to come back to its factory default settings.

In most cases, this way can be helpful and solve almost the whole problem.

SOFT RESET TP Link Deco Router

- Attach your TP Link Deco Router with a computer or mobile phone using a wired or wireless connection.

- Open any browser and then enter the default web address tplinkwifi.net in the address bar. Press Enter and you will be directed to the TP Link Deco login page.

- Login to the TP Link Deco wizard using the default username and password.

- After clicking Administration from the tab list, hit on Device Administration.

- You will notice a reset button under the reset router setting wizard.

- After giving the authorization command proceed to reset. Put the admin password and click on Ok.

- The TP Link Deco Router will start the reset process and make sure the power connection is uninterrupted, or else the process may not run smoothly.

Once the reset process is done, you can update the device firmware and begin with the setup process again.

Hard Reset vs Soft Reset

A soft reset restarts the device while normally keeping your configuration. A hard reset returns the Deco to factory settings and requires network setup again.

USING THE WEB-BASED INTERFACE

- Log in by entering the username and password on the management page to use the factory default function.

- The default IP address, username, and password can be used.

- From the left side of the menu bar, go to System Tools.

- Select the Factory Defaults button from the screen.

You will see a restore option on the right side.

After clicking on the Restore button, the WiFi will reset to the factory default settings.

What Should You Do After Resetting TP Link Deco?

After the reset:

Open the Deco app.
Start the Deco setup process.
Connect the Deco to your modem or internet source.
Create your WiFi name and password.
Add additional Deco units if required.
Reconnect your phones, computers, cameras and other devices.
Test your internet connection.

Conclusion

The router will reboot itself, or you can also use another way by going to System Tools, selecting the reboot option, and clicking ok. The reset button may remove the password from the WIFI permanently, rename the network or offline. Once you have reset tp link deco to factory settings, you can reconfigure the settings by following the general TP Link Deco setup guide. If you get stuck with any issues during the TP Link Deco router reset process, you can reach out to the team of experts at our end now.

FAQs:

1. Can I reset TP-Link Deco without the app?

Yes, you can always reset the tp-link deco router using the web interface method described in this blog. Follow them step-by-step to proceed and complete the deco reset process.

2. Why is my Deco flashing yellow after reset?

When you see a yellow light on your Deco after resetting it, it means there are connection issues. Check the cable connections between the devices, and try power cycling them once. You can also check if there are any pending firmware updates that you might need to download.

3. Do I need to reset all Deco units?

Yes, when you reset your main Deco unit, you will also need to remove the other units from the Deco account. This way, they will be reset and need to be added back to the account.

4. When should I reset my TP-Link Deco?

Whenever basic troubleshooting steps like restarting the devices, power cycling them, updating the firmware, and more don’t help resolve the device issues, it is a sign that you should reset tp link Deco to factory settings.

5. Will resetting Deco delete all settings?

Yes, when you reset Deco, it deletes all the settings like network name, password, the device login ID and password and any firmware updates installed to it. The device will be taken back to factory state and the setup process will need to be followed again.

6. What if the reset button doesn’t work on TP Link Deco?

If the reset button doesn’t work, you can use the tp link setup interface to access the device administration settings and then follow the on-screen instructions to reset it to factory settings.

7. Why can’t I reset my TP-Link Deco router?

Connect with our expert team today!