TP Link Deco XE200 SetupStep-By-Step Guide

Open the TP Link Deco XE200 setup in your device and log in using your TP Link ID. Plug the main Deco XE200 into your modem using an Ethernet cable. Then, open the application, choose the model of your Deco XE200, and follow the on-screen prompts to set up your internet connection and Wi-Fi network. Finally, plug any additional Deco devices into your main device to extend your mesh network.

Having a strong and fast internet connection is vital when streaming, gaming, and using smart devices. The TP-Link Deco XE200 mesh WiFi 6E setup gives you Wi-Fi 6E and tri-band mesh technology to ensure you get a reliable connection around your home. To ensure you’re getting the most out of your system, it needs to be properly set up. 

With the Deco app on your mobile or other device, you can easily set up your TP-Link Deco XE200 by adding more units to your network and adjusting your Wi-Fi settings. This guide will show you how to install, set up, reset, and update your Deco XE200. It will also help to fix any issues you may have during setup.

What Is the TP Link Deco XE200?

The TP Link Deco XE200 is a whole-home mesh system offering AXE11000 Wi-Fi 6E. It is a multi-deco system that allows you to easily connect devices in your home, as it will automatically connect to whichever access point it needs without you having to change Wi-Fi manually.

Key Features

This system is useful for big homes and if you have multiple devices connected and need fast, high-bandwidth wireless.

Requirements Before Starting the TP Link Deco XE200 Setup

Prepare the following before installing the TP Link Deco XE200 setup on your device.

  1. Deco XE200s: Your main Deco and extra Decos.
  2. Internet Modem: Ensure your modem works correctly.
  3. Smartphone or other device: Ensure you have an Android / iOS smartphone with the TP-Link Deco App installed.
  4. TP-Link Account: Create a TP-Link ID or have your login details ready
  1. Ethernet Cable: Use the included Ethernet cable to connect your main Deco to your modem.
  2. Power Adapters: Use the original power adapters.
  3. Internet Details: Have your ISP Username and Password to hand if you are using PPPoE authentication.

Key Point: Ensure Bluetooth is enabled on your smartphone in case the TP-Link app asks you to enable it whilst discovering your devices. Position your main Deco close to your modem and place your extra Decos in suitable spots.

How to Set Up TP-Link Deco XE200?

Follow the given  steps to complete your TP Link Deco XE200 setup:

  1. Download the Deco App: Download the official TP-Link Deco App from either the Google Play Store or the Apple App Store.
  2. Log In: Open the app and log in using your TP-Link ID.
  3. Connect the Main Deco: Connect your main Deco XE200 to your modem using an Ethernet cable and then plug in the power adapter.
  4. Add Your Device: Open the app and click Add Deco. Select the XE200 model.
  5. Internet Setup: Follow the on-screen instructions. Select your type of internet connection from your ISP. This could be Dynamic IP or PPPoE.
  6. Create Wi-Fi Network: Enter your preferred Wi-Fi name and create a strong password.
  7. Add Additional Units: Plug in your additional Deco units and follow the instructions in the app to connect them to your mesh network.
  8. Check that your internet is working and that all your Deco units are working.

How to Install TP-Link Deco XE200?

Correctly place your TP-Link Deco XE200 so you get the best out of your mesh network. First, place your main Deco unit where it will be close to your modem and centrally in an open space. Don’t place it in thick walls or metal cabinets or near large electrical appliances, as it might disrupt the wireless signal. Place additional Deco units to help provide a strong connection in areas that have poor Wi-Fi. Once all the units are connected via the power adapters provided, check that they have paired correctly by checking the LED lights. Walk around your house with your smartphone connected to check your signal strength. If you want a more stable connection, you can connect compatible Deco units together via Ethernet backhaul. This supports proper installation of the TP-Link Deco XE200 mesh WiFi 6E setup. 

How to Reset the Deco XE200 Setup?

The first step to reset Deco is to ensure it is turned on. Locate the reset button on the Deco and press and hold for about one second. Release the button and wait for the light on the Deco to change. This will reset your Deco to default settings. Your Deco will then reboot and remove any previous Wi-Fi name, password, and network settings. When you see the light flashing blue, you can begin setting up your Deco again. Open the TP-Link Deco App. Log in using your TP-Link ID. Choose your XE200 model and follow the on-screen prompts to set up a new Wi-Fi network.

How to Update the Firmware of Deco XE200?

On your smartphone device, install and open the TP-Link Deco app. Log in to your account using your TP-Link ID. Then select your Deco network. Now either press More or Update (depending on what version you are using). Press Deco XE200 firmware update. If there are any updates available, select the update option. Wait for the update to be installed. Make sure your Deco XE200 does not lose power during the process. Once it has rebooted, check the app to make sure the new firmware was installed.

TP-Link Deco XE200 Login and Network Management

The Deco XE200 is mainly controlled via the TP-Link Deco App.

For Deco network login, follow these instructions:

  • Open up the official Deco App on your phone. 
  • Log in using your TP-Link ID and password. 
  • Confirm that your account is valid by entering any required information. 
  • Choose your Deco XE200 network. 
  • Click into your network to see an overview of your devices.

Once you have logged in, you will be able to manage your network by following the given points.

  • Change your Wi-Fi name and password.
  • View connected  Devices.
  • Create a Guest Network.
  • Parental controls – through HomeShield.
  • Prioritise devices – using QoS features.
  • View your internet and mesh status.
  • Restart or delete Deco units.
  • Check for firmware updates.

Note: If you are unable to log in, double-check that you have the correct account details, a working internet connection, and that the Deco App is updated.

Common TP-Link Deco XE200 Setup Problems and Solutions

While installing your Deco is easy, sometimes there can be a few issues. Below are some of the most common issues and how to solve them.

Problem

Solution 

Deco XE200 not found

Turn on Bluetooth (if asked), close the app and re-open and get your phone close to the Deco.

No internet connection

Ensure your modem and Ethernet cable are working properly and check your ISP connection settings.

Red light blinking

Check that your unit is properly connected to your main Deco.

Blue light blinking

Use the setup instructions within the app to pair your device.

Firmware update error

Ensure you have a stable internet connection, and check your hardware version and firmware availability.

Mesh signal weak

Move secondary Deco units closer to the main unit.

Login error in app

Check your TP-Link ID and password or retrieve your account details.

Extra Deco not connecting

Reset the unit, move the unit closer to the main Deco, and try to add the Deco.

 

Deco XE200 vs TP Link Deco XE75

Both the Deco XE200 and TP Link Deco XE75 Pro support Wi-Fi 6E and tri-band mesh networking. However, they are designed for different performance requirements to satisfy the user.

Feature

Deco XE200

Deco XE75 Pro

Wi-Fi Standard

Wi-Fi 6E

Wi-Fi 6E

Speed Class

AXE11000

AXE5400

6 GHz Speed

Up to 4804 Mbps

Up to 2402 Mbps

5 GHz Speed

Up to 4804 Mbps

Up to 2402 Mbps

2.4 GHz Speed

Up to 1148 Mbps

Up to 574 Mbps

Ethernet Ports

1 × 10 Gbps + 2 × 1 Gbps

1 × 2.5 Gbps + 2 × 1 Gbps

Device Capacity

Over 200 devices

Up to 200 devices

Best For

Device-intensive networks, High-performance

Everyday high-speed home networking

Frequently Asked Questions

How do I access the Deco XE200 Router login?

Open up the TP-Link Deco app and log in with your TP-Link ID. From the dashboard, select your network, and this will show you all the devices connected to your network. From here, you can adjust your Wi-Fi settings, security settings, and status. Most of your Deco XE200 settings can be adjusted through the app.

If your Deco is unable to connect to the internet, it could be due to your modem being switched off, incorrect ISP settings, a loose Ethernet cable or an issue with your internet provider. Turn your modem back on and restart your main Deco. Check that your Ethernet cable is plugged in properly and check your WAN settings in the app. If your ISP is a PPPoE connection, make sure your username and password are correct.

A flashing red light usually indicates that your Deco is not connected to the main Deco unit. A steady red light indicates there is an issue. Check your power, Ethernet cables, and wireless connections between units. Move your satellite nearer to your main Deco and reboot.

A flashing blue light indicates that your Deco is ready for setup or WPS is taking place. Open the Deco app, select the correct model, and follow the pairing steps. If your light is still blue after setup, then close and re-open the app.

Open up the Deco app and select Add New Deco. Choose your compatible model and follow the prompts. Switch on your extra unit and place it near your main Deco whilst pairing. Once paired successfully, move it to a suitable position.

Yes! The Deco XE200 is Wi-Fi 6E compatible; it can operate on 2.4GHz, 5GHz and 6GHz. The 6GHz band can give you extra bandwidth and less congestion. If your devices aren’t Wi-Fi 6E compatible, they won’t be able to connect.

Yes! You can connect your Deco XE200 to your current router. Set your Deco to run in Access Point Mode. Connect your main Deco to your current router with an Ethernet cable. Set up your Deco through the app and set the operating mode to Access Point. This means your current router can still route while the Deco provides mesh Wi-Fi.

Request a Call Back for an Instant Assistant


This will close in 0 seconds

Scroll to Top