Have you forgotten the password or lost access to your TP-link Deco Router? No worries, we are here to help you out in every scene, as problems with technology are inevitable. The instructions provided below will help you to resolve the issue and work smoothly and hence regain access to your TP Link Deco Router. The use of the factory reset tp link deco steps shouldn’t be your sole priority in case of any issues. One can REBOOT or RESTART the system as well. Still, in the worst-case scenario, we can consider the following options to Reset TP Link Deco Router.
What Happens When You Reset TP Link Deco To Factory Settings?
When you reset Deco router, it can help resolve the following issues:
- Problems during streaming HD videos and playing video games.
- Problem while connecting to the internet.
- TP Link Deco keeps going offline
- Issues with broadband data speed.
- Problem with the wireless devices.
- The problem with routing.
- Problem with device incompatibilities.
Keep in mind the following instructions when you reset TP Link Deco Router:
- Take note that the router is switched on before it restarts.
- You can note the default IP address and domain name from the lowermost of the product.
How to Reset Deco TP Link Router– The Process
Your TP Link Deco Router can be reset in two distinct ways- the Soft RESET method and the push-button RESET method. When you factory reset tp link deco router using any of these methods, the network settings including any device configuration that you have modified will be removed and deleted from the device memory. Also, the network SSIDs and the security protocol-like preferences will also be reset to default factory settings. If you are someone who has just bought the router for the first time, it is better to take a backup of the settings so it’s easier for you during the reconfiguration process. Once done, you can upload the backup file and the settings will be restored to the previous version.
HARD RESET TP Link Deco Router
- One way to reset TP Link Deco to factory settings is by using the Reset button.
- Locate the button on the rear or bottom of the device. You will find it concealed inside a small hole. This is done so the device doesn’t get reset accidentally.
- Press and hold the RESET button for about 10 seconds or until the LEDs on the front don’t glow simultaneously.
- Once that happens, release the RESET button and wait for the router to come back to its factory default settings.
In most cases, this way can be helpful and solve almost the whole problem.
SOFT RESET TP Link Deco Router
- Attach your TP Link Deco Router with a computer or mobile phone using a wired or wireless connection.
- Open any browser and then enter the default web address tplinkwifi.net in the address bar. Press Enter and you will be directed to the TP Link Deco login page.
- Login to the TP Link Deco wizard using the default username and password.
- After clicking Administration from the tab list, hit on Device Administration.
- You will notice a reset button under the reset router setting wizard.
- After giving the authorization command proceed to reset. Put the admin password and click on Ok.
- The TP Link Deco Router will start the reset process and make sure the power connection is uninterrupted, or else the process may not run smoothly.
Once the reset process is done, you can update the device firmware and begin with the setup process again.
USING THE WEB-BASED INTERFACE
- Log in by entering the username and password on the management page to use the factory default function.
- The default IP address, username, and password can be used.
- From the left side of the menu bar, go to System Tools.
- Select the factory defaults button from the screen.
You will see a restore option on the right side.
- After clicking on the Restore button, the WiFi will reset to the factory default settings.
Conclusion
The router will reboot itself, or you can also use another way by going to system tools, selecting the reboot option, and clicking ok. The reset button may remove the password from the WIFI permanently, rename the network, or offline. Once you have reset tp link deco to factory settings, you can reconfigure the settings by following the general TP Link Deco setup guide. If you get stuck with any issues during the TP Link Deco router reset process, you can reach out to the team of experts at our end now.
FAQs:–
1. Can I reset TP-Link Deco without the app?
2. Why is my Deco flashing yellow after reset?
When you see a yellow light on your Deco after resetting it, it means there are connection issues. Check the cable connections between the devices, and try power cycling them once. You can also check if there are any pending firmware updates that you might need to download.
3. Do I need to reset all Deco units?
4. When should I reset my TP-Link Deco?
Whenever basic troubleshooting steps like restarting the devices, power cycling them, updating the firmware, and more don’t help resolve the device issues, it is a sign that you should reset tp link Deco to factory settings.
5. Will resetting Deco delete all settings?
Yes, when you reset Deco, it deletes all the settings like network name, password, the device login ID and password and any firmware updates installed to it. The device will be taken back to factory state and the setup process will need to be followed again.
6. What if the reset button doesn’t work on TP Link Deco?
If the reset button doesn’t work, you can use the tp link setup interface to access the device administration settings and then follow the on-screen instructions to reset it to factory settings.
7. Unable to factory reset tp link deco router?
Connect with our expert team today!